Description

Motorcycle helmet is plastic based and requires multiple painting treatment for user acceptance. High quality coating line solution is the base for high quality motorcycle helmets coating machine. The workflow is a bit different for helmet coating line. For quality control requirement, there’s carefully manual pre-treatment involved. The purpose is to get smooth surface by repairing some bad points by sanding. Then we need to spray a sticky base coat on it to make sure color coatings can be well coated.

Application

Motorcycle helmets coating machine is used to coating motorcycle helmets.

Features

1 Good abrasion resistance
2 Easy to operate
3 Nice after-service support
4 Environment-protect
5. Clear, anti-scratched visor
6 Comfortable interior

Parameters of Motorcycle Helmets Coating Machine

Model	SZD1300H	SZD1600H	SZD1800H
Size of the Vacuum Chamber	Φ1300 × H1500 mm	Φ1600 × H1800 mm	Φ1800 × H2000 mm
Door in the Vacuum Chamber	Double door	Double door	Double door
Ultimate Vacuum	<3×10-3Pa	<3×10-3Pa	<3×10-3Pa
Pumping Time	8×10-2 Pa<8 min	8×10-2 Pa<8 min	8×10-2 Pa<8 min
Number of Filament (PCS)	About 20pcs	About 28pcs	About 32pcs
Number of Rotation Reel (axis)	About 6 axis	About 8 axis	About 10 axis
Filament Power Supply	<25 kW	<30 kW	<35 kW
Observation Window (PCS)	1 PCS	1 PCS	1 PCS
Ion Bombardment Source (group)	1 group	1 group	1 group
Secondary Protective Film (sets)	1 group	1 group	1 group
Evaporation Electrode (group)	1 or 2 group	1 or 2 group	1 or 2 group
Vacuum System	2X-70(2)+ZJP-300+KT-800	H-150(2)+ZJP-600+KT600(2)	H-150(2)+ZJP-600+KT800(2)
Water Pressure	≥0.2MPa	≥0.2MPa	≥0.2MPa
Air Pressure	0.5 to 0.8MPa	0.5 to 0.8MPa	0.5 to 0.8MPa
Power Source (380V,50Hz)	60 kW	75 kW	90 kW
Polycold (Selectable)	12P	15P	15P